Richmond and Steveston · Bed liners
Spray-on bed liners for Richmond trucks
ProVanWorks sprays bed liners onto pickup trucks and work vans from Richmond and Steveston at our shop in Langley, a drive off the island by bridge or tunnel. A spray-on liner bonds to the bed and seals the metal, which is what a truck needs on an island at sea level where the bed is wet for months and the air carries salt. Most trucks are at the shop for 1 to 2 days.
How far is the ProVanWorks shop from Richmond?
Richmond is on an island, so the trip to Langley always starts with a bridge or the George Massey Tunnel. Most Richmond drivers cross by the Alex Fraser Bridge from Highway 91, or through the tunnel on Highway 99, then head east on the South Fraser Perimeter Road or Highway 10 to the shop. Traffic at the tunnel can add a lot of time at rush hour, so a midday drop-off and pickup is easier for the 1 to 2 days the liner takes.
Why do Richmond trucks need a bed liner?
Richmond trucks work in two very different settings. The industrial and warehouse areas along the Fraser and around the airport keep trades and service trucks busy hauling pallets, ducting, pipe and tools, and loading docks are hard on a truck bed. In east Richmond, farm trucks carry bins, irrigation gear and equipment across wet fields. Both kinds of load scratch the paint in the bed down to metal.
Richmond's weather keeps that metal wet. The city sits at sea level, it gets rain far more often than snow, and wind off the Strait of Georgia carries salt air across Steveston and the west side of the island. A bed with scratches through the paint stays damp for most of the wet season, which is how rust starts along the seams and under old mats. A spray-on bed liner seals the bed so that water has nothing to reach.
Do you line floors on Richmond delivery and service vans?
Yes. ProVanWorks sprays floor liners for cargo and work vans, covering the floor, lower walls and wheel wells. Richmond has a lot of delivery and service vans running between warehouses and customers all day, and every stop means boxes sliding across the floor and wet boots climbing in from the rain. A sprayed floor takes that wear and can be mopped dry at the end of the day.
How much does a bed liner cost for a Richmond truck?
ProVanWorks quotes each bed liner by email, because the price depends on the size of the bed and the condition it is in. Email info@provanworks.com with the year, make and model, the bed length and a few photos of the bed. If the truck has carried a drop-in liner or a rubber mat through Richmond's wet winters, take it out and photograph the metal underneath.
Frequently asked questions
Is a spray-on liner worth it in Richmond if it rarely snows?
Yes. Rain and salt air, not snow, are what wear out a Richmond truck bed. Water that sits in a scratched bed for months rusts the metal even without road salt. A liner seals the metal against both. Rust that is already there has to be prepared first, so send photos with your quote request.
Can I get other work done at the Langley shop on the same trip?
Yes. The same shop installs roof fans and A/C in Richmond vans, designs and installs van wraps, and builds mobile grooming vans for Richmond. One quote can cover all of it, which saves a second trip through the tunnel.
Last updated